Sulfamerazine (SM1) ELISA Kit
For reference only. Please follow the manual included in your kit for instructions.
Catalog Number
RDF-E115
The Sulfamerazine (SM1) ELISA Kit (RDF-E115) is an enzyme-linked immunosorbent assay for quantitative detection of SM1 in Food samples with a standard range of 0.5-8.0ppb. This kit uses the Traditional ELISA format for colorimetric detection of natural SM1 in samples including Muscle,Honey,Milk,Egg. The kit is easy to use and comes with a pre-coated microplate and all necessary reagents and buffers. The standard curve generated in the experiment is used to calculate the concentration of SM1 in samples. For research use only.
Product Specifications
Product Name
Sulfamerazine (SM1) ELISA Kit
Catalog Number
RDF-E115
Detection Range
0.5-8.0ppb
Species Reactivity
Food
Species
Food
Assay Length
60 minutes
Experimental Method
Competitive Inhibition
Detection Method
Colorimetric
Sample Type
Muscle,Honey,Milk,Egg
Storage
2-8°C,Avoid freeze
Shelf Life
12 monthes
Product Details
Intended Use
For the quantitative detection of Sulfamerazine (SM1) concentration in muscle, honey, milk, and egg samples.
Assay Principle
This kit uses Competitive-ELISA as the method for the quantitative detection. It can detect Sulfamerazine (SM1) in samples, such as honey, muscle, etc. This kit is composed of ELISA Microtiter plate, HRP conjugate, antibody working solution, standard and other supplementary reagents. The microtiter plate in this kit has been pre-coated with coupled antigen. During the reaction, SM1 in the samples or standard competes with coupled antigen on the solid phase supporter for sites of anti-SM1 antibody. Then Horseradish Peroxidase (HRP) conjugate is added to each microtiter plate well, and substrate reagent is added for color development. There is a negative correlation between the OD value of samples and the concentration of SM1. The concentration of SM1 in the samples can be calculated by comparing the OD of the samples to the standard curve.
Application Data
Reagents and Materials Provided
| Reagent | Quantity |
|---|---|
| ELISA Microtiter plate | 96 wells |
| Standard Liquid | 1 mL each (ppb=ng/mL=ng/g) (0 ppb, 0.5 ppb, 1.0 ppb, 2.0 ppb, 4.0 ppb, 8.0 ppb) |
| HRP Conjugate | 5.5 mL |
| Antibody Working Solution | 5.5 mL |
| Substrate Reagent A | 6 mL |
| Substrate Reagent B | 6 mL |
| Stop Solution | 6 mL |
| 20×Concentrated Wash Buffer | 40 mL |
| 2×Reconstitution Buffer | 50 mL |
| Plate Sealer | 3 |
| Sealed Bag | 1 |
| Manual | 1 |
All reagent bottle caps should be tightly closed to prevent evaporation and microbial contamination.
Materials Required but not Supplied
- Equipment: Microplate reader, Printer, Homogenizer, Nitrogen evaporators, Water bath, Vortex mixer, Centrifuge, Graduated pipette, Balance (sensibility 0.01 g), incubator.
- Micropipettes: single-channel 20-200 µL, 100-1000 µL, and multi-channel 30-300 µL.
- Reagents: N-hexane, Ethyl Acetate, Acetonitrile, Na2HPO4·12H2O, NaOH, HCL, NaH2PO4·2H2O.
Storage
- Store the kit at 2-8℃. Do not freeze any kit components.
- Return any unused microwells to their original foil bag and reseal them together with the desiccant provided. Continue to store at 2-8℃.
- Shelf life is approximately 12 months from date of manufacture. Check packaging for expiry date.
Sample Preparation
- Muscle (animal):
- Remove fat from sample, homogenize the sample with homogenizer.
- Weigh 3±0.05 g of homogenate sample, add 3 mL of 0.02M PB Solution (Solution 2), vortex sample until dissolve completely.
- Add 4 mL of Ethyl acetate and 2 mL of Acetonitrile, vortex for 10 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Take 2 mL of upper organic phase into another centrifuge tube, dry in nitrogen evaporators/water bath at 50~60℃.
- Dissolve the residue with 1 mL of N-hexane and 1 mL of Reconstitution Buffer (Solution 4) vortex for 1 min, centrifuge at 4000 r/min for 5 min at room temperature.
- Discard upper organic liquid, take 50 µL of lower layer liquid for analysis.
- Honey:
- Weigh 1±0.05 g of homogenate sample, add 1 mL of 0.5M HCL Solution (Solution 3), and vortex 1 min. Incubate at 37℃ for 30 min in Water bath.
- Add 2.5 mL of 0.2 M NaOH Solution (Solution 1), adjust PH to 5. Add 4 mL of Ethyl acetate, vortex for 5 min, and centrifuge at 4000 r/min for 10 min at room temperature.
- Take 2 mL of supernatant into another centrifuge tube, dry in nitrogen evaporators/water bath at 50~60℃.
- Dissolve the residue with 0.5 mL of Reconstitution Buffer (Solution 4) vortex for 1 min, centrifuge at 4000 r/min for 5 min at room temperature.
- Take 50 µL of liquid for analysis.
- Take 20 μL of milk sample, add 380 μL of 0.02M PB Solution (Solution 2) and mix fully.
- Take 50 μL of liquid for analysis.
- Egg:
- Weigh 2±0.05 g of homogenate sample, add 4 mL of Ethyl Acetate, and vortex 3 min. Centrifuge at 4000 r/min for 10 min at room temperature.
- Take 2 mL of supernatant into another centrifuge tube, dry at 50-60 °C with nitrogen evaporators or water bath.
- Dissolve the residue with 0.5 mL of Reconstitution Buffer (Solution 4) vortex for 4 min, centrifuge at 4000 r/min for 5 min at room temperature.
- Take 50 µL of liquid for analysis.
Reagent Preparation
Solution preparation:
Prepare solutions according to the number of samples. Avoid using all components in the kit at once.
Solution 1: 0.2 M NaOH Solution (for honey sample)
Dissolve 0.8 g of NaOH to 100 mL with deionized water.
Solution 2: 0.02M PB Solution (for muscle, milk sample)
Dissolve 2.58 g of Na2HPO4·12H2O and 0.44 g of NaH2PO4·2H2O to 500 mL with deionized water.
Solution 3: 0.5M HCL Solution (for honey sample)
Dilute 4.3 mL of HCL to 100 mL with deionized water.
Solution 4: Reconstitution Buffer (for muscle, honey, egg sample)
Dilute 2×Reconstitution Buffer with deionized water. (20×Concentrated Wash Buffer (V): Deionized water (V) = 1:1).
Solution 5: Wash Buffer
Dilute 20×Concentrated Wash Buffer with deionized water. (20×Concentrated Wash Buffer (V): Deionized water (V) = 1:19).
Notes:- Bring all reagents and samples to room temperature before use.
- Turn on the microplate reader 30 min in advance to preheat the instrument and set the testing parameters.
- All experimental apparatus should be clean, and disposable pipette should be used and changed frequently to avoid cross-contamination during the experiment.
Assay Procedure
Bring all reagents and samples to room temperature (25℃) before use. All reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Any unused Microtiter plate wells should be resealed as soon as possible and stored at 2-8℃.
- Number: number the samples and standards in order (multiple wells), and keep a record of the plate layout. Standards and Samples must be tested in duplicate.
- Add Sample: add 50 μL of Standard or Sample to each well, then add 50 uL HRP Conjugate and 50 μL Antibody Working Solution, and cover the plate with plate sealer. Oscillate gently for 5 s to mix thoroughly, then incubate at 25℃ for 45 min in the dark.
- Wash: Carefully remove the plate sealer, then remove the liquid from each well. Immediately add 300 μL of Wash Buffer (Solution 5) to each well and wash. Repeat wash procedure 5 times, 30 s intervals each time. Invert the plate and pat it against a thick sheet of absorbent paper (If there are bubbles in the wells, clean pipette tips can be used to pop them).
- Color Development: add 50 μL of Substrate Reagent A to each well, and then add 50 μL of Substrate Reagent B. Gently oscillate for 5 s to mix thoroughly. Incubate at 25℃ for 15 min in the dark (The reaction time can be extended according to the amount of color change).
- Stop Reaction: add 50 μL of Stop Solution to each well. Gently oscillate to mix thoroughly.
- OD Measurement: determine the optical density (OD value) of each well at 450 nm (reference wavelength 630 nm) with a microplate reader. This step should be performed no later than 10 min after the reaction has been stopped.
Calculation of Results
Absorbance (%) = A/A₀×100%
- A: Average absorbance of standard or sample
- A₀: Average absorbance of 0 ppb Standard
- Drawing and calculation of standard curve
- Create a standard curve by plotting the absorbance percentage of each standard on the y-axis against the log concentration on the x-axis to draw a semi-logarithmic plot. Add the average absorbance value of each sample to the standard curve to calculate the corresponding concentration. If samples have been diluted, the concentration calculated from the standard curve must be multiplied by the dilution factor.
- We recommend using professional software for fast and accurate analysis of large numbers of samples.
Product Data
Reaction conditions (Incubation time and temperature)
25℃; 45 min, 15 min
Detection limit
Muscle, Honey ---0.5 ppb; Milk---10 ppb; Egg---0.25ppb
Cross-reactivity
Sulfamerazine ---100%
Sample recovery rate
Muscle, Honey ---95%±25%; Milk, Egg ---85%±25%