Tylosin (TYL) ELISA Kit
For reference only. Please follow the manual included in your kit for instructions.
Catalog Number
RDF-E058
The Tylosin (TYL) ELISA Kit (RDF-E058) is an enzyme-linked immunosorbent assay for quantitative detection of TYL in Food samples with a standard range of 0.5-40.5ppb. This kit uses the Traditional ELISA format for colorimetric detection of natural TYL in samples including Muscle,Honey,Milk,Egg. The kit is easy to use and comes with a pre-coated microplate and all necessary reagents and buffers. The standard curve generated in the experiment is used to calculate the concentration of TYL in samples. For research use only.
Product Specifications
Product Name
Tylosin (TYL) ELISA Kit
Catalog Number
RDF-E058
Detection Range
0.5-40.5ppb
Species Reactivity
Food
Species
Food
Assay Length
75 minutes
Experimental Method
Competitive Inhibition
Detection Method
Colorimetric
Sample Type
Muscle,Honey,Milk,Egg
Storage
2-8°C,Avoid freeze
Shelf Life
12 monthes
Product Details
Intended Use
For the quantitative detection of tylosin concentration in muscle, honey, milk, and egg samples.
Assay Principle
This kit uses Competitive-ELISA as the method for the quantitative detection. It can detect Tylosin (TYL) in samples, such as muscle, honey, etc. This kit is composed of ELISA Microtiter plate, HRP conjugate, antibody working solution, standard and other supplementary reagents. The microtiter plate in this kit has been pre-coated with coupled antigen. During the reaction, TYL in the samples or standard competes with coupled antigen on the solid phase supporter for sites of anti-TYL antibody. Then Horseradish Peroxidase (HRP) conjugate is added to each microtiter plate well, and substrate reagent is added for color development. There is a negative correlation between the OD value of samples and the concentration of TYL. The concentration of TYL in the samples can be calculated by comparing the OD of the samples to the standard curve.
Application Data
Reagents and Materials Provided
| Reagent | Quantity |
|---|---|
| ELISA Microtiter plate | 96 wells |
| Standard Liquid | 1 mL each (ppb=ng/mL=ng/g) (0 ppb, 0.5 ppb, 1.5 ppb, 4.5 ppb, 13.5 ppb, 40.5 ppb) |
| HRP Conjugate | 11 mL |
| Antibody Working Solution | 5.5 mL |
| Substrate Reagent A | 6 mL |
| Substrate Reagent B | 6 mL |
| Stop Solution | 6 mL |
| 20xConcentrated Wash Buffer | 40 mL |
| 2xReconstitution Buffer | 50 mL |
| Plate Sealer | 3 |
| Sealed Bag | 1 |
| Manual | 1 |
All reagent bottle caps should be tightly closed to prevent evaporation and microbial contamination.
Materials Required but not Supplied
- Equipment: Microplate reader, printer, homogenizer, nitrogen evaporators, water bath, vortex mixer, centrifuge, graduated pipette, Balance (sensibility 0.01 g).
- Micropipettes: Single channel (20-200 μL, 100-1000 μL), Multichannel (30-300 μL).
- Reagents: NaOH, Methanol, Concentrated HCl, Acetonitrile, Trichloromethane, N-hexane.
Storage
- Store the kit at 2-8℃. Do not freeze any kit components.
- Return any unused microwells to their original foil bag and reseal them together with the desiccant provided. Continue to store at 2-8℃.
- Shelf life is approximately 12 months from date of manufacture. Check packaging for expiry date.
Sample Preparation
- Muscle (livestock):
- Remove fat from sample, homogenize the sample with homogenizer.
- Weigh 2±0.05 g of homogenate sample into 50 mL centrifuge tube, add 8 mL of Extraction Solution (Solution 4), vortex for 5 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Take 2 mL of the supernatant, add 1 mL of 0.1M NaOH Solution (Solution 1) and mix fully, then add 3 mL Trichloromethane and vortex for 5 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Discard the upper phase, take the lower organic phase to glass centrifuge tube, dry at 56℃ with nitrogen evaporators or water bath. (Please do it in a ventilated environment.)
- Dissolve the residue with 1 mL of Reconstitution Buffer (Solution 5), vortex for 1 min and mix fully.
- Take 50 μL for analysis.
- Honey:
- Weigh 1±0.05 g of sample into 50 mL centrifuge tube, add 2 mL of deionized water, and vortex for 2 min to dissolve fully.
- Add 10 mL Trichloromethane and vortex for 5 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Discard the upper phase, take the lower organic phase to glass centrifuge tube, dry at 56℃ with nitrogen evaporators or water bath.
- Dissolve the residue with 1 mL of Reconstitution Buffer (Solution 5), vortex for 1 min and mix fully.
- Take 50 μL for analysis.
- Take 0.5 mL of milk sample into 15 mL centrifuge tube, add 2 mL of 0.01M NaOH Solution (Solution 3), and vortex for 2 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Take 1 mL of the supernatant into 15 mL centrifuge tube, add 2 mL of N-hexane and vortex for 2 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Discard the upper n-hexane, take 0.1 mL of the lower layer to 1.5 mL centrifuge tube, add 0.9 mL of Reconstitution Buffer (Solution 5), vortex for 1 min and mix fully.
- Take 50 μL for analysis.
- Egg:
- Remove the skin from sample, homogenize the sample with homogenizer.
- Weigh 1±0.05 g of sample into 15 mL centrifuge tube, add 4 mL of 0.01M NaOH Solution (Solution 3), and vortex for 2 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Take 2 mL of the supernatant into 15 mL centrifuge tube, add 4 mL of N-hexane and vortex for 2 min, centrifuge at 4000 r/min for 10 min at room temperature.
- Discard the upper n-hexane, take 0.1 mL of the lower layer to 1.5 mL centrifuge tube, add 0.9 mL of Reconstitution Buffer (Solution 5), vortex for 1 min and mix fully.
- Take 50 μL for analysis.
Reagent Preparation
Solution preparation:
Prepare solutions according to the number of samples. Avoid using all components in the kit at once.
Solution 1: 0.1M NaOH Solution (for livestock sample)
Dissolve 0.4 g of NaOH to 100 mL with deionized water, mix fully.
Solution 2: 0.1M HCl Solution
Dissolve 0.86 mL of Concentrated HCl to 100 mL with deionized water, mix fully.
Solution 3: 0.01M NaOH Solution (for egg, milk sample)
Dissolve 0.4 g of NaOH to 1000 mL with deionized water, mix fully.
Solution 4: Extraction Solution (for livestock sample)
Mix 84 mL of Acetonitrile and 16 mL of 0.1M HCl Solution (Solution 2) then add 18 mL of Methanol and mix fully.
Solution 5: Reconstitution Buffer (for livestock, honey sample)
Dilute the 2×Reconstitution Buffer with deionized water (2×Reconstitution Buffer (V): Deionized water (V) =1:1), mix fully.
Solution 6: Wash Buffer
Dilute the 20×Concentrated Wash Buffer with deionized water (20×Concentrated
Wash (V) Buffer: Deionized water (V) =1:19), mix fully.
Notes:- Bring all reagents and samples to room temperature before use.
- Turn on the microplate reader 30 min in advance to preheat the instrument and set the testing parameters.
- All experimental apparatus should be clean, and disposable pipette should be used and changed frequently to avoid cross-contamination during the experiment.
Assay Procedure
Bring all reagents and samples to room temperature (25℃) before use. All reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Any unused Microtiter plate wells should be resealed as soon as possible and stored at 2-8℃.
- Number: number the samples and standards in order (multiple wells), and keep a record of the plate layout. Standards and Samples must be tested in duplicate.
- Add Sample: add 50 μL of Standard or Sample to each well, then add 50 μL Antibody Working Solution, and cover the plate with plate sealer. Oscillate gently for 5 s to mix thoroughly, then incubate at 25℃ for 30 min in the dark.
- Wash: Carefully remove the plate sealer, then remove the liquid from each well. Immediately add 300 μL of Wash Buffer (Solution 6) to each well and wash. Repeat wash procedure 5 times, 30 s intervals each time. Invert the plate and pat it against a thick sheet of absorbent paper (If there are bubbles in the wells, clean pipette tips can be used to pop them).
- HRP Conjugate: add 100 μL of HRP Conjugate to each well, incubate at 25℃ for 30 min in the dark.
- Wash: repeat step 3.
- Color Development: add 50 μL of Substrate Reagent A to each well, and then add 50 μL of Substrate Reagent B. Gently oscillate for 5 s to mix thoroughly. Incubate at 25℃ for 15 min in the dark (The reaction time can be extended according to the amount of color change).
- Stop Reaction: add 50 μL of Stop Solution to each well. Gently oscillate for 10 s to mix thoroughly.
- OD Measurement: determine the optical density (OD value) of each well at 450 nm (reference wavelength 630 nm) with a microplate reader. This step should be performed no later than 10 min after the reaction has been stopped.
Calculation of Results
Absorbance (%) = A/A₀×100%
- A: Average absorbance of standard or sample
- A₀: Average absorbance of 0 ppb Standard
- Drawing and calculation of standard curve
- Create a standard curve by plotting the absorbance percentage of each standard on the y-axis against the log concentration on the x-axis to draw a semi-logarithmic plot. Add the average absorbance value of each sample to the standard curve to calculate the corresponding concentration. If samples have been diluted, the concentration calculated from the standard curve must be multiplied by the dilution factor.
- We recommend using professional software for fast and accurate analysis of large numbers of samples.
Product Data
Reaction conditions (Incubation time and temperature)
25℃, 30 min, 30 min, 15 min
Detection limit
Muscle ---1 ppb; Honey ---0.5 ppb; Egg, Milk ---25 ppb.
Cross-reactivity
Tylosin ---100%, Erythromycin ---1%, Other macrolides antibiotics --- < 1%
Sample recovery rate
Muscle ---85%±10%; Honey, Egg, Milk ---85%±15%.